POLYFLOOR EP

 

TYPICAL APPLICATIONS

 
 POLYFLOOR EP  could be used as an anti slip-resistance, abrasion resistance, chemical resistance, & floor coating in areas such as:
 
Tanks and silos.
Soft drinks Factories.
Warehouses.
Laundries.
Car production areas.
Dairies & dye works.
Garages.
Industrial areas vertical surfaces.
PRODUCT  FEATURES
 
Smooth and high build floor coating.
Solvent free and odourless.
Excellent adhesion to most substrates.
Wear & abrasion resistance.
High mechanical strengths.
Slip resistance. Highly Durable.
High chemical resistance to most common reagents.
Suitable for the Middle' East conditions.
PROPERTIES
 
Solid Content 
100% 
Specific Gravity 
1.5 @ 20°C.
Pot life 
70 minutes @ 20°C and.
40 minutes @ 30°C.
Full Cure 
7 days @ 20°C 
5 days @ 30°C.
Light Traffic 
After 48 hours @ 20°C 
After 24 hours @ 30°C.
Recommended Dry Film Thick.
Approximately 200 microns.
Bond Strength to Concrete (dry)
 3 N/mm2 depending on the quality of     concrete 
Chemical Resistance 
Visual inspection shows no effect on samples immersed in the following chemicals for 365 days @ 35°C
Acids :
Sulphuric Acid, 50%                             Excellent
Hydrochloric Acid,50 %          Excellent  Nitric Acid,25 %                                           Excellent
Phosphoric Acid,50 %                       Excellent       
Citric Acid,10 %                                  Excellent        
Lactic Acid,10 %                                 Excellent              
Alkalis:
Sodium Hydroxide,50 %       Excellent Ammonia solution, 10%          Excellent Solvents :
Petrol, oil, kerosene                              Excellent   
Butanol                                                  Good
Skydrol                                                 Good
Others :
Bleach, 5%                                         Excellent Saturated Urea                                 Excellent For more details, consult POLECOO Technical Services.
 
GUIDE FOR APPLICATION
Surface Preparation
All surfaces should be sound, dry, free from 
oil, grease. loosely adhering particles. Steel surfaces should be free from scale and rust.
The concrete age should be 28 days at least.
 
Priming 
Concrete surfaces should be primed with POLYPRIME EP (see separate data sheet). The primer should be allowed to achieve a tack-free condition before applying POLYFlOOR EP
 
Mixing
Mix component a(Resin) well then pour all the amount of the component B (Curing Agent) to it.
Mix thoroughly by slow speed electric drill (300-500 rpm) until a smooth and even consistency is achieved.
 
Application
Apply the mixed material to the prepared & primed surface using, stiff brush, roller or spray (airless with pressure ratio 1: 40).
 
CLEANING
Clean all tools and equipment immediately after use with POLYSOLVENT EP.
 
PACKAGING
POLYFlOOR EP  is supplied In 6 kg  pack, (Compound A and Compound B).
 
COVERAGE
 
Approximately 3.30 m2 / Kg at 200 micron D.F.T.
 
STORAGE
 
POLYFLOOR EP  should be stored at room temperature in dry warehouse.
 
SHELF LIFE 
One year.
 
HEALTH AND SAFETY
 
Epoxy Resins contain irritants, especially to the skin, eyes.
Persons handling these materials shall use appropriate protective clothing, including rubber or plastic gloves.
If the epoxy resin should contact the skin, it should be removed immediately with a dry cloth or paper towel, and the areas of contact washed thoroughly with soap and water.
Guarantee / Warranty
We warrant our products to be of good quality and manufactured to rigid standards. This warranty is in lieu of any and all other warranties expressed or implied. 
This data sheet is published for information only. It is believed to be correct but no liability is accepted for it or the suitability of the product for any particular purpose. 
POLYCOO services is free and the company dose not accept liability for any loss arising from it.
 
TECHNICAL SERVICES
For any further technical advice and recommendation for the use of all POLYCOO  products, please consult the nearest POLYCOO technical office.

Quick Overview:

  • Short Description:

    PRODUCT DESCRIPTION POLYFlOOR EP is a two component, solvent free, nun-toxic, slightly thixotropic protective floor coating which is based on epoxy resin and specially selected curing agents, designed for continuous protection to chemical attack. It is available in six standard colours, special colour on request.

  • Files:

    POLYFLOOR EP