POLYFLOOR CORUNDUM

 

 Typical Application 

                                    
 
Industrial Floors.
Warehouses where high abrasion and impact loads are expected.
Passenger & freight terminals.
Iron armored joints.
Distribution centres.
Where wear, impact and abrasion resistance are required.
Product Features
 
Provides a high strength wearing surface compared to concrete.
Non - dusting in service.
Available in various colours.
Economical and easy to apply.
Increases impact resistance to concrete surface.
 
 
Limitations
 
NOT recommended for use on slabs subjected to continuous wetting and acid spillage.
 
Standards
 
POLYFLOOR CORUNDUM is tested to the appropriate sections of the following standards:-BS-1881 & ASTM C-109.
 
 
 
Properties
 
Colour 
Brick  red & Gray.
Other colours could be specially ordered.
 
Abrasion Resistance 
POLYFLOOR CORUNDUM improves the abrasion resistance of concrete
by 260 %.
 
Compressive Strength 
77 N/mm2 after 28 days.3-6 hours
 
Guide for Application
 
Preparation
Base concrete should have a minimum cement content of 350 Kg/m3. Concrete mix should be designed to minimize segregation and bleeding.
Base concrete should be compacted in accordance with good concrete practice.
 
Application 
The rate of POLYFLOOR CORUNDUM should be determined. It mainly depends on the rate of expected traffic; (light - medium - heavy).
Start applying POLYFLOOR CORUNDUM when foot step leaves an imprint of 3 mm. on the concrete.
Apply the first application of POLYFLOOR CORUNDUM    by spreading 2/3 of the specified quantity on the concrete surface.
Float the concrete surface with a wooden float or a mechanical power float.
Spread the remaining of POLYFLOOR CORUNDUM over the concrete surface, then float again as before after the absence of sheen water (after one hour @25°C)
 
Note: POLYFLOOR CORUNDUM is supplied ready to use on site, never add cement or aggregates to the product.
 
Curing
 
We recommend the use of POLYCURE WB I to cure concrete surfaces immediately after trawling. (See separate data sheet)
 
Cleaning
 
Tools should be cleaned immediately with water after use.
 
Packaging
 
POLYFLOOR CORUNDUM is supplied in 25 kg. bags.
 
Coverage
 
3  Kg/m2 for light traffic.
5  Kg /m2 for medium traffic.
7 Kg/m2 for heavy traffic
 
STORAGE
POLYFLOOR CORUNDUM should be stored in shaded areas away from any surface of moisture.
 
Shelf Live
 
One year when stored correctly in unopened containers.
 
 
 
Health and safety
 
POLYFLOOR CORUNDUM is non flammable.
Any splashes on skin should be washed with water.
Seek medical assistance in case of contact with eyes, after washing it with running water.
 
 
Guarantee / Warranty
 
We warrant our products to be of good quality and manufactured to rigid standards. This warranty is in lieu of any and all other warranties expressed or implied. 
This data sheet is published for information only. It is believed to be correct but no liability is accepted for it or the suitability of the product for any particular purpose. 
POLYCOO services are free and the company dose not accepts liability for any loss arising from it.
 
Technical Services
 
For any further technical advice and recommendation for the use of all POLYCOO products, please consult the nearest POLYCOO technical office.

Quick Overview:

  • Short Description:

    Impact And Abrasion Resistant Dry Shack Floor Hardener Product Description POLYFLOOR CORUNDUM is a dry shake floor hardener, designed of clean and graded Quarts aggregates together with a unique polymer modified cementations blend. POLYFLOOR CORUNDUM bonds monolithically with the concrete substrate eliminating cracking, shrinkage, curling and other problems associated with thin floor layers.

  • Files:

    POLYFLOOR CORUNDUM