POLYTILE MORTAR

 

TYPICAL APPLICATIONS

 
·   For fixing swimming pool tiles.
·   For fixing wall and floor tiles.
·   For decorative stone cladding.
 
PRODUCT  FEATURES
 
·    High water resistance.
·   Easy to use.
·   Thin and thick bed.
 
STANDARDS
POLYTILE MORTAR complies with the following standards BS 5980 Type 1 & BS 5385 Append A.
 
PROPERTIES
 
colour
Gray or white.
Compressive Strength
45 N/mm2.
Adhesion
Excellent to tiles and decorative stone.
Tensile Strength
6 N/mm2
Water Absorption
<5%.   
 
GUIDE FOR APPLICATION
Preparation
Surface to be tiled should be sound, clean, free from any dust.
Remove all loose particles, oil, grease and curing compounds. Surfaces treated should be washed with clean water.
 
MIXING 
POLYTILE MORTAR by adding the powder to clean water
at the rate of 5: 1 to form the desired consistency.
A slow speed drill is acceptable for mixing. Mix mortar till a unifol consistency is achieved.
 
APPLICATIONS 
Use Notched trowel to apply POLYTILE MORTAR on the working area with a thickness of 3-6 mm.
Fix tiles by pressing into place. Ensure that the required joint width is left around each tile. Clean oft any surplus on the face of the tiles and between joints before hardening. Leave the tiles for a minimum of 24 hours then grout the joints using POLYTILE GROUT.
 
CLEANING
 
Tools should be cleaned immediately with water after use .
 
PACKAGING
POLYTILE MORTAR is supplied in 25kg . packs.
 
COVERAGE
25 kg POLYTILE MORTAR covers 5.50 m2 at a thickness of 3 mm.
 
STORAGE
 
POLYTILE MORTAR should be stored under shed.
 
SHELF LIFE
One year when stored as recommended.
 
HEALTH AND SAFETY 
·   POLYTILE MORTAR is non flammable, any splashes on skin should be washed with water.
Seek medical assistance, in case of contact with eyes after washing it with plenty of water.
 
Guarantee / Warranty
We warrant our products to be of good quality and manufactured to rigid standards. This warranty is in lieu of any and all other warranties expressed or implied. 
This data sheet is published for information only. It is believed to be correct but no liability is accepted for it or the suitability of the product for any particular purpose. 
POLYCOO services is free and the company dose not accept liability for any loss arising from it.
 
TECHNICAL SERVICES
For any further technical advice and recommendation for the use of all POLYCOO  products, please consult the nearest POLYCOO technical office.

Quick Overview:

  • Short Description:

    Cementations Tile Adhesive PRODUCT DESCRIPTION POLYTILE MORTAR is a blend of selected ordinary Portland cement, graded sand & organic polymer. It is especially formulated for fixing wall and floor tiles.

  • Files:

    POLYTILE MORTAR