POLYPROOF S

 

Typical Applications

 
External coating of pipes .
As an external belowground coating for brickwork, concrete & steel structures .
Damp - proof course membrane, horizontally & vertically .
Rust protection of metal surfaces .
As a curing compound for the freshly laid concrete .
Internal waterproofing lining for water storage, concrete reservoirs & steel tanks.
Product Features
 
One component, ready to use and easy to apply.
Quick drying .
Can be applied to damp concrete .
Excellent adhesion to most substances .
Cold applied bitumen coating .
High coverage rates.
Standards
POLYPROOF S complies with BS 3416 Types 1 &2 . As a bituminous coating and with ASTM C-309 as a curing compound .
 
Properties
 
Colour 
Black.
 
Specific gravity 
at 20°C               860 Kg / m3
 
Drying Time 
half to one-hour approx depending on substrates and temperature.
 
Over coating time     Double of drying time
Time between Coatings 24 hours .
 
Flash point                
37 DC (flammable) Do not use near a naked flame and do not smoke during application
 
 
 
Guide For Application
 
Preparation 
All surfaces must be clean, sound and free from oil, grease and all loosely adherent materials.
Wire brush, sandblast or grit blasting may be used to remove any surplus over concrete and steel.
 
Application
 
It may be applied by brush, roller or spray.
Apply a full coat of POLYPROOF S and allow to dry.
Apply a second coat at right angles to the first coat.
If a thicker film is required (specially at floor/wall corners), we may add fillers to the second coat.
Can be applied to protect steel substrates from corrosion
Packaging
 
POLYPROOF S is supplied in 20 lit. & 2101it. Drums
 
Coverage
 
3.0 to 5.0 m2 / lit. / coat depending on the nature of the substrate. It is recommended to cover the required area by two coats .
 
Storage
 
POLYROOF S should be stored in shaded areas
 
Shelf Life
 
One year when stored as recommended
 
Health & Safety
 
It is not allowed to smoke during application .
Contact with skin should be avoided, any splashes should be washed with soap and water .
Guarantee / Warranty
We warrant our products to be of good quality and manufactured to rigid standards. This warranty is in lieu of any and all other warranties expressed or implied. 
This data sheet is published for information only. It is believed to be correct but no liability is accepted for it or the suitability of the product for any particular purpose. 
POLYCOO services is free and the company dose not accept liability for any loss arising from it.
 
Technical Services
For any further technical advice and recommendation for the use of all POLYCOO  products, please consult the nearest POLYCOO technical office.

Quick Overview:

  • Short Description:

    Cold Applied Bitumen solvent Bass waterproofing coating Product Description POLYPROOF S is a low viscosity special blend of bitumen's added to solvent, which evaporates forming a high quality bitumen film.

  • Files:

    POLYPROOF S