PolyProof 1

 

TYPICAL APPLICATIONS

 
- Approved for use in contact with potable 
water.
- For coating concrete blocks to form an 
impervious coating.
- For sealing in concrete preventing ingress of water .
 
PRODUCT FEATURES
 
- Highly durable and good abrasion resistant. 
- Prepacked, only addition of water is 
required. 
- Excellent adhesion, bonds to porous and non 
porous surfaces. 
- Directly applied to concrete, plaster & block
work.
- Non toxic.
 
STANDARDS
POLYPROOF 1 complies with ASTM C 230 / 90.
 
PROPERTIES
Form
Powder
 
Colors
Grey, white, Brick red, Brown.
Other colours could be produced upon request.
 
Grade 
Available in two grades, smooth & textured
 
SPECIFIC GRAVITY ( MIXED) 
1.80
 
Toxicity
Non toxic
GUIDE FOR APPLICATION
Preparation
Substrate should be free from oil, dust, paint and laitance. 
Spelled concrete or plaster should be cut back to sound concrete, then repaired.
Soak area to be coated with water.
 
MIXING
For brush application add clean water then start mixing with a show speed drill . 
Slowly add the powder to the water and mix for 3-4 minutes. Mix thoroughly till reaching 
a homogeneous consistency. Keep mixing during application.
 
APPLICATIONS 
Concrete surface should be damp before application of POLYPROOF 1. 
Apply POLYPROOF 1, using a brush, in two coats perpendicular to each other .
 
CLEANING
Tools should be cleaned immediately with water after use.
 
PACKAGING
POLYPROOF 1 is supplied in 20 kg. Packs.
 
COVERAGE
17.0 to 25.0 m2 per pack per coat depending on nature of the substrate.
 
STORAGE
POLYPROOF 1 should be stored in shaded areas.
 
SHELF LIFE
One year when stored as recommended.
 
HEALTH AND SAFETY 
POLYPROOF 1 is non flammable and non 
Toxic, any splashes on skin should be washed 
with water. Seek medical assistance in case 
Of contact with eyes, after washing it with running water . 
Guarantee / Warranty
We warrant our products to be of good quality and manufactured to rigid standards. This warranty is in lieu of any and all other warranties expressed or implied. 
This data sheet is published for information only. It is believed to be correct but no liability is accepted for it or the suitability of the product for any particular purpose. 
POLYCOO services is free and the company dose not accept liability for any loss arising from it.
 
TECHNICAL SERVICES
For any further technical advice and recommendation for the use of all POLYCOO products, please consult the nearest POLYCOO technical office.

Quick Overview:

  • Short Description:

    Light Texture Cementations Waterproof Coating PRODUCT DESCRIPTION POLYPROOF is a single component cementations coating , used as a cementations waterproof coating .

  • Files:

    PolyProof 1