POLY DECORA COAT

 

DESCRIPTION & USES

• POLY DECORA COAT Synthetic Matt is a matt alkyd resin-based paint in solvent base, containing highly selected pigments and additives.

• For Exterior and Interior use.

• Can be applied over: wood, soft and hard board, concrete, plaster, zinc, metallized steel, new iron and galvanized steel (after special treatment).

• Good Hiding Fewer, wash ability and weather resistance.

• Can be used to make lacquer putty by adding DECORA Synthetic Matt to Lithopone (Zinc) & Calcium Carbonate.

 

PROPERTIES

Finish

Matt

Color

White

Density at 25°C

1.46 - 1.54 kg/ (white)

Viscosity at 25°C

115 - 120 KU (white)

% Solid Content by volume

43 ± 2

Wash ability / Wet Scrubbing

Highly washable

Diluents / Thinner

White Spirit

Drying Time at 25°C

Touch Dry: 30 - 60 min.

and relative humidity 50%

Recoat: 3-4 hours

Recommended DFT

Hard Dry: 24 hours

30 - 40 /urn

 

INSTRUCTIONS FOR USE

1)      Surface preparation:

• Surface must be clean, free from oil, grease, dirt, chalk...etc.

• Surface must be dry, clean and free from oil, grease, dirt, chalk...etc.

• On ferrous and non-ferrous metals use suitable primer like RUSTPROOF 111 before applying DECORA Synthetic Matt.

• On painted substrates; wash and leave to dry, make sure that old paints are not loose before new painting.

2)      Application:

• In case of using brush or roller

First Coat: dilute with 15% White Spirit.

Second Coat: dilute with 5 -10% White Spirit.

• In case of using spray-gun:

Dilute with 10 - 20% White Spirit depending on gun.

 

APPLICATION TOOLS

Brush - Roller - Airless Spray Gun

 

COVERAGE

12.5 -16.5 m2/l per coat at the recommended DFT in case of white according to preparation & porosity of substrate.

 

PACKAGING

Available in small containers and gallons. Refer to company price list for more information.

 

STORAGE & SHELF-LIFE

18 months in original tightly closed containers away from direct sunlight and excessive heat.

 

 

Our recommendations are based on extensive research as well as practical experience. Results can not be guaranteed where the actual application work is beyond our control. Customers must carry out their own investigations and test the suitability of our materials before use for their intended purposes. Please note that this data sheet supersedes any previous prints. For any additional information, please consult our customer service department.

Quick Overview: