POLY WEATHER COAT

 

INSTRUCTIONSFOR USE

1)      Surface preparation:

• Surface must be clean, free from oil, grease, dirt and chalk... etc.

• Old painted surfaces should be cleaned from loose paint and other materials that can affect adhesion.

 

2)      Recommended Application System:

• Use POLY WEATHER COAT PRIMERS to increase spreading rate and adhesion prior to application of topcoat.

•  Mix POLY WEATHER COAT DUST-GUARD to uniform consistency before use.

• Dilution up to 10% with water.

•  Wait 3 hours between each coat for complete drying.

 

REMARKS

• Alternative systems may be specified, depending on area of use.

• Please refer to technical office for application advice

 

APPLICATION TOOLS

 Roller, Brush, Spray Gun

 

THEORETICAL COVERAGE

8-13.3 m2/ Ltr. per coat at the 30: 50 microns DFT.

Practical coverage varies depending on surface porosity, application method, DFT and losses.

 

STORAGE AND SHELF-LIFE

36 months in original tightly closed containers away from direct sunlight and excessive heat.

 

‘Teflon is a registered trademark of The Chemours Company FC, LLC used under sublicense by Scib Chemical S. A. E **For exterior use please refer to the exterior colour chart.

"‘Refer to Material Safety Data Sheet (MSDS ) before using the product.

 

 

Our Recommendations are based on extensive research as well as practical experience. However, as the product is often used under conditions beyond our control, we cannot guarantee anything but the quality of the product itself. We reserve the right to change the given data without notice. Please note that this data sheet supersedes any previous prints. For any additional information, please consult our technical office.

Quick Overview: