POLYCOATE EP  is designed for protecting & coating most building and masonry substrates (including wall boards, plasters, wood, metals, unglazed ceramic tiles, marble & stones) in :

  • Canning factories.
  • Food processing areas.
  • Kitchens.
  • Public buildings.
  • Warehouses.
  • Lavatories shower stalls.
  • Bottling plants.
  • Industrial areas.
  • Corridors.


  • Tile like gloss finish.
  • Excellent adhesion to most materials.
  • Wear & abrasion resistance.
  • Durable with long maintenance-free life.
  • Completely washable with normal soap.
  • High build up coating.
  • Chemical resistance to most common reagents.
  • Formulated to be suitable for the Middle East conditions.



Gloss coloured finish.
Specific Gravity
Pot Life 
70 minutes @ 20°C 
40 minutes @ 30°C.
Touch to dry 
 8 hour @ 20°C.
Full Cure 
7 days @ 20°C
 5 days @ 30°C.
Working Temperature
 + 5 °C (minimum) 
Dry Film Thickness
 Approximately 150 microns per coat.
Recoatable Time
 12 - 24 hours @ 20°C.
Bond Strength to Concrete (dry)
3 N/mm2 depending on the quality of concrete.
Chemical Resistance 
Visual inspection showed no effect when samples were immersed in the following chemicals for 360 days.
Sulphuric Acid, 50 %                 Excellent
Hydrochloric Acid, 20 %           Excellent
Nitric Acid, 25 %                      Excellent
Phosphoric Acid, 50 %               Excellent
Acetic Acid, 10 %                      Excellent
Citric Acid, 10%                        Excellent                               
Lactic Acid, 10 %                      Excellent
Sodium Hydroxide,50 %           Excellent
Ammonia solution,10 %              Excellent
Petrol, oil, kerosene 50%         Excellent
Butanol                                      Good
Skydrol                                     Good
Bleach, 5 %                               Excellent 
Saturated Sugar (Diluted)       Excellent 
For more details, consult
POOLYCOO Technical Support .


Surface Preparation
All surfaces should be sound, dry, free from oil, grease, loosely adhering particles and any contamination.
Steel surfaces should be free from rust & scale, recommended to be sandblasted to SA 2 1/2 
The concrete age should be 21 days at least with a moisture content less than 5%.
POLYCOATE EP  could be used directly without a primer, POLYPRIME EP is compatible to be used as a primer coat when recommended.
Stir both Component a (Resin) and Component B well before use. Pour all the amount of the component B (Curing Agent) to the container of Component A (Resin), mix thoroughly till a uniform colour and consistency is achieved. Slow speed electric drill fitted with a mixing paddle is recommended.
 Apply the mixed material to the prepared surface using stiff brush, roller or spray (airless with pressure ratio 1: 40). In case of the necessity to a second coat, apply the second coat after 12 - 24 hours @ 20°C.


 Clean all tools and equipment immediately after use with POLYSOLVENT EP 20


POLYCOATE EP is supplied in 5 kg or 10 kg packs, (Compound A and Compound B).


Approximately 4 - 6 m2 Kg at D.F.T. 150 micron depending up on the conditions of the substrate.


POLYCOATE EP should be stored at room temperature in dry warehouse away from extreme temperatures.

Shelf Life

 One year.

Health and Safety.

  • Epoxy Resins contain irritants, especially to the skin, eyes.
  • Persons handling these materials should use appropriate protective clothing, including rubber or plastic gloves
  • If the epoxy resin came in contact with the skin, it should be removed immediately with a dry cloth or paper towel, and the areas of contact washed thoroughly with soap and water

Guarantee / Warranty

We warrant our products to be of good quality and manufactured to rigid standards. This warranty is in lieu of any and all other warranties expressed or implied. 
This data sheet is published for information only. It is believed to be correct but no liability is accepted for it or the suitability of the product for any particular purpose. 
POLYCOO services is free and the company dose not accept liability for any loss arising from it.


For any further technical advice and recommendation for the use of all POLYCOO  products, please consult the nearest POLYCOO technical office.

Quick Overview:

  • Short Description:

    PRODUCT DESCRIPTION POLYCOATE EP is a two component, high build, chemical resistant, nun-toxic, hard wearing protective epoxy coating. It is designed to impart a tile like gloss finish on virtually any building and masonry surfaces. The cured film provides a durable abrasion & chemical resistance coating. POLYCOATE EP is available in various standard colours. Special colours could be requested.

  • Files: